Pneumatic Brake Fluid Bleeder Tool Kit

FEATURES

PNEUMATIC BRAKE OIL BLEEDING TOOL: This brake bleeder kit is used for changing brake and clutch oil, as well as sucking out old oil and air from the brake system on motorcycles, cars, trucks, pickups, and many other models. This brake bleeding tool kit is very suitable for daily renewal of brake fluid, and brake fluid supplement after brake system maintenance. Pneumatic operating tools save worry and effort.

WASTE OIL EXTRACTOR BOTTLE: A 1-liter waste brake fluid bottle has a cap assembly, which is equipped with 1/4 inch American and European air plugs to connect your large air compressor. An ergonomic trigger with a locker allows you to free your hands when operating. The 1.8-meter-long transparent hose is good for monitoring the working situation easily, with a universal black tapered nipple for connecting caliper bleeder valve threads.

AUTOMATIC BRAKE OIL REFILL DEVICE: There is a long screw fitting on the cap of 0the .8 liters refill bottle, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, and the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But if 0.8 liters is not enough, remember to add new oil in time.

4 SIZES MASTER CYLINDER ADAPTER: The brake system bleeding tool kit includes 4 master cylinder adapters for most vehicle models, 21 to 30 mm, 24 to 32 mm, 28 to 37 mm, and 32 to 41 mm. The adapters can be screwed on the brass screw of the new oil refill bottle cap, and help to clamp the new oil bottle on the master cylinder, no manual support is required.

EASY TO OPERATE: Fix a suitable master cylinder adapter on the long brass screw. Add a proper amount of new brake fluid to the new oil refill bottle and then buckle it upside down on the master cylinder. Connect the brake oil extractor to the brake caliper and your large compressor(more than 4 cubic feet per minute). Turn on the compressor, negative pressure is generated in the braking system to suck out the waste fluid and air and guide the new oil to fill the whole brake system.

ONE-PERSON OPERATION DESIGN: The refill bottle can be held on the brake fluid reservoir by the master cylinder adapter. On the 1-liter waste oil extractor bottle, there is a hanger that can hook on the wheel, as well as the trigger locker, which is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when using this brake and clutch bleed tool.

SPECIFICATION

Package Includes: 1 * Pneumatic Brake Fluid Bleeder Tool Kit

NOTE

Please wear gloves and goggles when used.

The vacuum brake bleeding kit should be used by a professional or under the guidance of a professional.

Always refer to the equipment manufacturer's operation instructions.

Please hold the bottle cap to open the bottle, not the trigger or anything else.

It is a pneumatic tool only, and can not be used as a hand tool.

If there is any leakage on the joint of the vehicle bleeder valve and black suction nipple, please try GREASE to seal it.

The new oil bottle is 0.8L, and if 0.8L is not enough, remember to add new oil in time while using. If the brake fluid in the main cylinder runs out, the air will follow into the brake system.

When using, please make sure that the ball valve on the new oil bottle is fully opened to ensure the flow rate.